Voltage stabilizer with relay PNI AVR M500VA, 1.4A, 300W, 500VA

No voltage fluctuations

The PNI AVR M500VA 300W voltage stabilizer with relay has been designed to keep the output voltage as stable as possible. When the voltage from the electrical network fluctuates, the PNI AVR M500VA will automatically adjust the voltage to the normal value.

Depending on their capacity, PNI stabilizers have a wide range of applications: electronic devices, household appliances, air conditioners, power tools, refrigerators and in general, electronics that need stable voltage.

How does it work?

When the unit that measures the input voltage detects a variation outside the preset range, it will send a signal to the control unit. The secondary voltage transformer will change the polarity and magnitude of the compensation voltage and control the output voltage within the preset range.

Copper coil is the basic component of the voltage stabilizer. PNI AVR M500VA 300W voltage stabilizer with relay uses high quality pure copper. Thus, the coil has a longer life and greater efficiency.

Maximum load supported

The maximum load supported by the PNI AVR M500VA voltage stabilizer is 300W 1.4A.

The stabilizer's 300W 1.4A capacity allows you to connect household appliances, including TVs, printers, microwave ovens, fans, and more.

Attention: do not connect consumers with loads exceeding the stabilizer's power. For example, electronics with a motor/compressor can have 2-6 times more power than the declared power at startup. Choose the stabilizer taking this into account.

Essential functions

Within the nominal voltage range ±25% 50/60Hz, the PNI stabilizer provides 100% output power. Outside this range, the output power should be according to the attached diagram.

Important functions:

• output delay (time-delay) - 6 or 180 seconds;
• automatic overvoltage and undervoltage protection (180V - 250V);
• overload/overtemperature protection;
• automatic adaptation to input frequency (50 / 60 Hz).