Tulkot latviski

Qoltec Hybrid Solar Inverter Off-Grid 10KVA | 5,5kW | 100A | 48V | MPPT | Sinus

EB Kods: EB1097803128

Ražotāja preces kods: 
53887

Ražotājs, zīmols: 
QOLTEC

 468,69  
Bez PVN / gb
Pieejams piegādātāja noliktavā >10 gab.
⛟ Piegāde 3-6 darba dienas pēc apmaksas. 
-+

The off-grid hybrid inverter converts the energy created by PV modules into energy needed to power electrical appliances. It works as a solar charger and battery charger. Equipped with a multifunctional LCD display that records operating data allowing continuous monitoring and management of the entire system. The inverter operates in off-grid mode.
It has a built-in 100A MPPT charge controller. Possibility to connect an additional wi-fi module. Does not support BMS.

inwerter

The efficiency of a solar PV system depends on the selection of the right inverter, or solar inverter. The inverter performs a key function in this system, changing the DC current generated by the solar PV panels into AC current used by household appliances. The off-grid hybrid inverter combines the solar PV system, energy storage and the power grid. During the day, it charges the energy storage from the photovoltaic panels. The energy storage unit powers household appliances from the stored energy during the day, and when the batteries are discharged, it draws energy from the grid. The inverter works in off-grid mode, using excess solar energy to power consumers and charge the battery. In the event of an emergency, current is drawn from the solar PV system to the energy storage and can safely and uninterruptedly ensure the continuous operation of our appliances.

inwerter - Inverter with pure sine wave type inverter,
- automatic restart during power restoration,
- possibility of power supply from mains or generator,
- ability to change AC/Solar charger priority settings via LCD display,
- smart charger design for optimal battery performance,
- configurable input voltage range for home appliances and personal computers via LCD settings,
- configurable battery charging current depending on devices and PCs via LCD settings,
- protection against overload, overheating and short circuit,
- cold start function.

mppt The battery charging inverter uses a state-of-the-art 100A MPPT charge controller to maximize the power drawn from the photovoltaic panels, using advanced maximum power point tracking technology.

Having this feature significantly affects the efficiency of the photovoltaic installation-they can maintain high power even in low sunlight conditions. In addition, the controller controls the battery operation and charging process and protects the battery from damage.

wyświetlacz The product is equipped with a multifunctional, easy-to-use LCD display with control panel. Facilitates monitoring of the entire photovoltaic installation . Allows you to configure the input voltage range for home appliances and personal computers or change the priority settings of the AC/Solar charger. In addition, the display records data and informs about failures, reacting accordingly if any of the parameters exceed the norm. If a fault occurs, the inverter shuts down.

Get clean energy with our solar inverters! Product comes with a 24 month warranty from the date of purchase.
ProducerQoltec
TypeOff-Grid
Phase1
Rated Power5500VA/5500W
Nominal Input voltage230 VAC
Input Voltage Range90 - 280 VAC
Working frequency60/50 HZ
Maximum power10000 VA
Efficiency90 % ~ 93%
Transfer time10 ms (PC) 20 ms (Home appliances)
WaveformPure sine wave
Type of chargingMPPT
Battery voltage48 VDC
Battery charging voltage54 VDC
Maximum charging current100 A
Battery overcharge protection63 VDC
Maximum battery charging current from PV100A
Built-in batteryNo
Maximum PV array open circuit power5500 W
Maximum solar charge current100 A
MPPT STARTING VOLTAGE180 V
MPPT operating voltage range120 ~ 450VDC
Maximum PV array open circuit voltage500 VDC
ScreenLCD
Connector diameterM6 - 6 mm
Cooling system2x fans
Noise level45 dB
ProtectionAnti-short-circuit Against overheating Against overload Against overload
ColourGreen, black
Additional informationPossibility to connect an additional wi-fi module Does not support LiFePO4 batteries Does not support BMS
NoticesWe require the device to be installed by a qualified installer with the appropriate authorization. In case of installation by unauthorized persons, the warranty will automatically expire. The included protocol is an integral part of the warranty and is necessary to file a claim for defective goods within 24 months from the date of purchase.
Working temperature-10˚C ~ +50˚C
Storage temperature-15˚C do +60˚C
Package contentsSolar inverter RS232 communication cable Mounting accessories User manual CD Device installation protocol Warranty card
Package depth / length [mm]590
Package height [mm]208
Package width [mm]390
Net weight [kg]10.500
Gross weight [kg]11.500
CertificateCE
Warranty24 month