MULTIPLE-STAGE OUTPUT CURRENT LED POWER SUPPLY - 25 W - SELECTABLE OUTPUT CURRENT WITH PFC

Product basic info: "
†Primary colours: Grey "
†Additional colours: Blue "
†Depth unit: 10.5 cm "
†Height unit: 2.3 cm "
†Width unit: 6.8 cm "
†Weight unit: 180 g "
†Material: Plastic + PS/LED "†Electrical data: "
†Standby power consumption: 0.5 W "
†Environment specifications: li>operating temperature: -30 to +60 &deg,C

operating humidity: 20-90 % RH non-condensing

storage: -40 to +80 &deg,C, 10-95 % RH

temperature coefficient: &plusmn, 0.03 %/&deg,C (0-50 &deg,C)

vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z

"
†Functionality specifications:

auxiliary power: 12 V @ 50 mA for driving fan, tolerance &plusmn, 5 %

temperature compensation: by external NTC thermistor (not provided with the power supply)

dimming

synchronization

"
†Input specifications:

voltage range: 180-277 VAC 254-392 VDC

frequency range: 47-63 Hz

power factor (typ.): &gt,= 0.975 / 230 VAC, &gt,= 0.96 / 277 VAC at rated power

total harmonic distortion: lower than 20 % when output load is 75 % or higher

efficiency (typ.): 86 %

AC current (typ.): 0.17 A / 230 VAC, 0.15 A / 277 VAC

inrush current (typ.): cold start 20 A (twidth = 260 &micro,s measured at 50 % Ipeak) at 230 VAC

leakage current: &lt, 0.5 mA / 240 VAC

"
†Mean time between failures (MTBF): MTBF: min. 213.3 Kh, MIL-HDBK-217F (25 &amp,deg,C) "
†Protection specifications:

short circuit: constant current limiting, recovers automatically after fault condition is removed

overvoltage:

• 110-130 V
• protection type: shut down output voltage, re-power on to recover

over-temperature: shut down output voltage, re-power on to recover

"
†Safety and EMC specifications:

safety standards: UL8750, CSA C22.2 NO. 250.0-08, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved

withstand voltage: input to output: 3.75 kVAC

isolation resistance: input to output: &gt, 100 Mohm / 500 VDC / 25 &deg,C / 70 % RH

EMC emission: compliance to EN55015, EN61000-3-2 Class C (&gt,= 40 % rated power), EN61000-3-3

EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2 kV), criteria A

"†Technical data: "
†Power rating: 25 W "
†Dimmable: Yes "
†Output specifications:

selectable current: 350 mA / 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA

DC voltage range: 6-54 V / 6-50 V / 2-67 V / 6-42 V / 6-36 V / 6-28 V/ 6-24 V

rated power: 25 W

ripple current: &plusmn, 5.0 %

ripple &amp, noise (max.): 400 mVp-p

no-load output voltage (max.): 59 V / 41 V

current accuracy: &plusmn, 5.0 %

setup, rise time: 500 ms, 50 ms / 230 VAC at rated power

hold up time (typ.): 30 ms / 230 VAC at rated power

"
†Selectable current: Yes "†Set-up options: "
†Dimming type: Push dimming "†Environmental data: "
†Usage location: Indoor only "†Operational properties: "
†Power factor correction function (PFC): Yes "†IT connections: "
†Interface type: Build-in dali
output current selectable by DIP switches "†180-277 VAC input only "†built-in active PFC function "†protection against: short circuit / over-temperature "†cooling: free air convection "†fully isolated plastic case "†Class II power unit, no FG (frame ground) "†built-in DALI interface and push dimming function "†IP20 "†no-load power consumption: < 0.5 W "†power supply synchronization function up to 10 units "†suitable for indoor LED lighting applications "†3 years warranty