Lithium-iron-phosphate LiFePO4 19"RACK battery, capacity 100Ah, 48V, 3U

Advantages of lithium-iron-phosphate batteries:

• LiFePO4 batteries can be charged at a much higher current than gel or AGM batteries. models, which significantly shortens the charging time
• Half the weight and delivers more power than traditional lead-acid, gel or AGM batteries
• They have very high efficiency (about 95%) and low internal resistance, which allows fast charging with low energy losses
• They provide 100% rated power utilization regardless of discharge current.
• Life of lithium-iron-phosphate batteries is approximately 3000 cycles (full charge and discharge) or more depending on battery discharge
• They can operate in a very wide temperature range. They maintain their effectiveness both at -10 and 45 degrees Celsius
. • LiFePO4 batteries are non-toxic, non-polluting and contain no rare earth metals, making them environmentally friendly

Application:

• UPS systems
• Industrial emergency power systems
• Grid energy storage or renewables
• Telecommunication systems
• Yachts / motorhomes / photovoltaic installations
 
Parameters:

• Nominal voltage: 48V
• Maximum charging voltage: 54V ± 0.2V
• Final discharge voltage: 40.5V
• Nominal capacity: 200Ah
• Nominal charging current: 0.1C (20А, adjustable)
• Nominal discharge current: 0.3C (60А) adjustable)
• Maximum charging current: 0.5C (100A)
• Maximum discharge current: 0.5C (100A)
• Internal resistance: ≤ 90 mΩ
• Temperature range during charging: 0°C to 55°C
• Discharge temperature range: -20°C to 55°C
• Optimum storage temperature: -10°C to 45°C
• Permissible ambient humidity during operation: ≤ 85%
• Permissible ambient humidity during storage: 5% ~ 95% • Dimensions
: 482х460х267 mm (6U mounting height, 19 ''), 460 mm depth
• Protection class: IP20
• Lifetime: ≥ 2000 cycles (≥80% charge)
: 78 kg

The battery has a BMS function that protects against:

• overcharging
• excessive discharge
• reversed polarity
• overheating
• short circuit

Indicators and ports on the front panel:

• Communication ports: RS232x1, RS485x2
• Charging indicator
• ADDR
• Reset
• Alarm
• Works
• Earthing

Conforms to EN/IEC standards:

• EN 61000-6-1: 2007 Electromagnetic compatibility. Part 6. Common standards. Section 1. Noise resistance
• EN 61000-6-3: 2007 + A1: 2011 Electromagnetic compatibility. Part 6. Common standards. Section 3. Emission for residential, commercial and industrial environments.
• IEC 62620: 2014, IDT Secondary cells and batteries containing alkaline or other non-acidic electrolytes - Secondary lithium