Thermostat with humidity control 230V STC-3028

Thermostat with humidity control 230V STC-3028

The humidity and temperature sensor STC-3028 is a solution for use in many projects wherever it is necessary to control air humidity and temperature at the same time, for example in warehouses, production halls, drying rooms, greenhouses or museums.
The controller has two LED displays: 1 red to show the temperature and 2 blue to show the humidity.
Above the displays are LED diodes, the light of which informs about the activated relay and, therefore, about the operation of the corresponding system.
The thermostat has a heating / cooling option depending on the configuration, as well as a hygrometer with a drying / watering function depending on the configuration.

Temperature and humidity regulator complete with sensor, powered by 230V. It has 2 clear displays: red for temperature readings and blue for humidity, as well as rubber buttons for changing the configuration. Above each display is a diode that illuminates when the temperature/humidity control device is activated. Depending on the settings made, the controller can operate simultaneously in heating/cooling and humidifying/drying modes. The device is very easy to configure, it can handle connected devices (eg fans, heaters, humidifiers, sprinklers, boilers) with a power of up to 2500W and a maximum current consumption of 10A per channel. The module has a settings memory, a power failure does not reset the entered values.

Specification:

• type: temperature and humidity controller
• supply voltage 230V AC
• number of channels: 2 (1 for temperature control, 2 for humidity control)
• maximum power of controlled devices: 2500W for each channel
• maximum current consumption for each channel: 10A
• temperature measurement range: -20 to 80°C
• humidity measurement range: 0 to 100%RH
• resolution of humidity and temperature measurements: 0.1
• temperature measurement accuracy +/- 1°C
• humidity measurement accuracy +/- 0.1%
• dimensions: 75mm x 85mm x 29mm

Suitable for temperature and humidity control:

• in the technical premises
• in industrial halls,
• in terrariums,
• in freezers
• in greenhouses,
• mushroom cultivation rooms,
• drying rooms