DIGITAL MULTIMETER - CAT. II 500 V / CAT. III 300 V - 10 A - AUTO RANGE - 4000 COUNTS

Product basic info: "
†Instruction manual languages: Dutch, English, French, German, Polish, Portuguese, Spanish "
†Primary colours: Grey "
†Additional colours: Red "
†Depth unit: 30 mm "
†Height unit: 138 mm "
†Width unit: 74 mm "
†Weight unit: 120 g "
†Material: ABS "†Physical properties: "
†Cable length: 0.7 m "
†Display height: 21 mm "
†Display width: 47 mm "
†Display type: LCD "
†Backlight: Yes "
†Maximum digits display: 4000 "†Electrical data: "
†AC current:

• basic accuracy: ± (1.5% rdg + 3 digits), ± (2.5% rdg + 5 digits) for 4 A to 10 A range
• overload protection: 0.5 A / 500 V fuse for µA and mA range, 10 A / 500 V for 10 A range

"
†AC voltage:

• basic accuracy: ± (0.8% rdg + 3 digits) , ± (1.2% rdg + 3 digits) for 500 V range
• input impedance: 10 MOhm
• frequency range: 40-500 Hz
• maximum input: 500V DC or AC rms

"
†Audible continuity measurement: Yes "
†Audible continuity: built-in buzzer sounds if resistance is less than 50 Ohm
"
†Automatic polarity indication: Yes "
†Capacity:

• basic accuracy: ± (3.0% rdg + 10 digits), ± (2.5% rdg + 5 digits) for 512 nF to 51.2 µF range, ± (5.0% rdg + 10 digits) for 100 µF range
• overload protection: 500V DC or AC rms

"
†DC current:

• basic accuracy: ± (1.2% rdg + 2 digits), ± (2.0% rdg + 3 digits) for 4 A to 10 A range
• overload protection: 0.5 A / 500 V fuse for µA and mA range, 10 A / 500 V for 10 A range

"
†DC voltage:

• basic accuracy: ± (0.5% rdg + 2 digits) , ± (0.8% rdg + 2 digits) for 500 V range
• input impedance: &gt, 10 MOhm
• overload protection: 500 V DC or AC rms

"
†Diode test: Yes "
†Diode test specifications:

• test forward voltage of diode
• test voltage: approx. 1.5 V

"
†Duty cycle:

• 0,1% bis 99,9%
  • Grundgenauigkeit: ± (2,0% rdg + 2 Ziffern)
  • Empfindlichkeit: Sinuswelle 0,6 V rms
  • Überlastungsschutz: 500V DC oder AC rms

"
†Frequency:

• basic accuracy: ± (0.1% rdg + 5 digits)
• sensitivity: sine wave 0.6 V rms (10 MHz = 1.5 V rms)
• overload protection: 500V DC or AC rms

"
†Fuse type: F 0.50 A / 500 V, 5 x 20 mm, F 10 A / 1000 Vac / 1000 VDC, 5 x 20 mm "
†Out of range indication: Yes "
†Transistor test: No "
†AC current measurements: 0-400 µA, 10 A, 4 A, 4 mA, 40 mA, 400 mA "
†AC voltage measurements: 0-4 V, 40 V, 400 V, 500 V "
†Battery test measurements: 1.5 V, 9 V "
†Capacity measurements: 0-51.2 nF, 100 µF, 51.2 µF, 512 nF "
†DC current measurements: 0-0.4 mA, 10 A, 4 A, 4 mA, 40 mA, 400 mA "
†DC voltage measurements: 0-400 mV, 4 V, 40 V, 400 V, 500 V "
†Frequency measurements: 0-5.12 Hz, 5.12 kHz, 5.12 MHz, 51.2 Hz, 51.2 kHz, 512 Hz, 512 kHz "
†Duty cycle measurements: 0.1-99.9 % "
†Resistance measurements: 0-400 Ohm, 4 kOhm, 4 MOhm, 40 kOhm, 40 MOhm, 400 kOhm "
†Resistance specifications:

• basic accuracy: ± ( 1.0% rdg +3 digits), ± (1.0% rdg + 2 digits) for 4 kOhm to 4MOhm range, ± (1.5% rdg + 3 digits) for 40 MOhm range
• overload protection: 500 V DC or AC rms

"†Technical data: "
†Safety rating: CAT II / 500 V, Cat III / 300 V "
†Voltage tester type: AC / DC "
†Automatic power-off function: Yes "
†Pollution degree: 2 "
†Data-hold function: Yes "
†Battery test:

• basic accuracy: ± (5.0% rdg + 5 digits)
• overload protection: 0.5 A / 500 V fuse

"†Environmental data: "
†IP rating: IPx0 "
†Usage location: Indoor only "
†Operating temperature °C: 0-40 °C "
†Operating temperature °F: 32-104 °F "
†Storage temperature °C: -20-60 °C "
†Storage temperature °F: -4-140 °F "
†Maximum storage humidity: < 90 % "
†Maximum operating humidity: < 80 % "†Operational properties: "
†Range setting: Automatic, Manual "†Power supply: "
†Batteries included: Yes "
†Number of batteries: 2 "
†Low battery indicator: Yes "
†Battery composition: Alkaline "
†Batter