Tulkot latviski

ITE COMPACT SWITCHING POWER SUPPLY - SINGLE OUTPUT - 12 VDC - 3A - 36 W

EB Kods: EB344821118

Ražotāja preces kods: 
MWGST36E12-P1J

Ražotājs, zīmols: 
Taiwan

24,24 
Bez PVN / gb
Pieejams piegādātāja noliktavā >10 gab.
⛟ Piegāde 10-15 darba dienas pēc apmaksas. 
-+

output: "
†output voltage: 12 VDC "
†rated current: 3 A "
†max. output current: 0 - 3 A "
†power: 36 W "
†ripple & noise (max.): 100 mVp-p "
†voltage tolerance: +/- 3.0 % "
†line regulation: +/- 1 % "
†load regulation: +/- 3 % "
†setup, rise, hold up time: "

†1000 ms, 20 ms, 15 ms / 230 VAC "

†1000 ms, 20 ms, 15 ms / 115 VAC at full load "†input: "
†voltage range: "

†90 - 264 VAC "

†135 - 370 VDC "
†frequency range: 47 - 63 Hz "
†efficiency (typ.): 87.5 % "
†AC current (typ.): 0.7 A / 100 VAC "
†inrush current (typ.): 70 A / 230 VAC "
†leakage current: 0.25 mA / 240 VAC "†protection: "
†overload: "

†110 - 150 % rated output power "

†protection type (overload): hiccup mode, recovers automatically after fault condition is removed "
†overvoltage: "

†110 - 140 % rated output voltage "

†protection type (overvoltage): clamping by zener diode "†environment: "
†operating temperature: -30 to +70 °C "
†operating humidity: 20-90 % RH non-condensing "
†storage: -40 to +85 °C, 10 - 95 % RH "
†temperature coefficient: +/- 0.03 %/°C (0 - 50 °C) "
†vibration: 10 - 500 Hz, 2G 10 min/1 cycle, period for 60 min each along X, Y, Z axes "†safety & EMC: "
†safety standards: TÜV EN60950-1 approved "
†withstand voltage: input to output: 4242 VDC "
†isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH "
†EMC emission: compliance to EN55032 Class B, EN61000-3-2,3 Class A "
†EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11 "†others: "
†MTBF: min. 692,300 h, MIL-HDBK-217F (25 °C) "
†dimensions (L x W x H): 79 x 54 x 33 mm "
†weight: 209 g "
†plug: ID 2.1 x OD 5.5 mm "
†cable length: 1 m "†temperature: -30 °C to +50 °C "†output voltage tolerance: ± 10 %
universal AC input / full range "†no load power consumption < 0.3 W "†ErP Step 2 compliant "†meets EISA 2007 (Energy Independence and Security Act) "†2-pole Europlug "†Class II (without earth pin) "†protection against: short circuit / overload / overvoltage "†fully enclosed in plastic case "†approvals: TÜV / CB / CE "†meets LPS requirements "†2 years warranty "†stabilised output, low ripple & noise "†short-circuit & overload protection "†very high efficiency & low energy consumption