Saatavana tänään
Tulkot latviski
Noyafa NF-8209 Advanced Network Cable Tracker, Toner & Probe with PoE
Noyafa NF-8209 Advanced Network Cable Tracker, Toner & Probe with PoE
EB Koodi: NF-8209
Valmistaja, merkki: NOYAFA®
Valmistaja, merkki:
NOYAFA®
79,00 €
Sisältää arvonlisäveron / gb
3 Varastossa
on varastossa ElectroBase
on varastossa ElectroBase
- 【Digital Cable Scan】Three scanning modes for cable options: AC filter mode / analog mode / PoE mode.
- 【Multifunctional】 Cable length measurement, cable fault testing, PoE testing, hub flashing and NCV function, PSE standards detection, power modes.
- 【Cable Continuity and NCV Test】 Check the physical condition of STP, UTP network cable. AC voltage presence detection (50-1000V).
- 【PoE Testing】 Determine which pins provide power and determine which voltage, determine which type of PSE (at/af standard).
- 【Cable Test】 UTP telephone and coaxial network cable tester, which also determines the cabling.
- 【Distance to Fault】Measure the cable length and accurately determine the fault distance for the network cable, the range is 200m.
- 【Hub Flashing】 Locate the network port by the flashing port LED on the hub/switch
- 【Digital Cable Scan】Three scanning modes for cable options: AC filter mode / analog mode / PoE mode.
- 【Multifunctional】 Cable length measurement, cable fault testing, PoE testing, hub flashing and NCV function, PSE standards detection, power modes.
- 【Cable Continuity and NCV Test】 Check the physical condition of STP, UTP network cable. AC voltage presence detection (50-1000V).
- 【PoE Testing】 Determine which pins provide power and determine which voltage, determine which type of PSE (at/af standard).
- 【Cable Test】 UTP telephone and coaxial network cable tester, which also determines the cabling.
- 【Distance to Fault】Measure the cable length and accurately determine the fault distance for the network cable, the range is 200m.
- 【Hub Flashing】 Locate the network port by the flashing port LED on the hub/switch
| TECHNICAL PARAMETERS | |||
|
Transmitter
|
Wiremap | Cable type | CAT5、CAT6 (STP & UTP) |
| Test with switch directly | Yes | ||
| Max range | 600m | ||
| Length | Cable type | CAT5、CAT6 (STP & UTP) | |
| Test range | 2~200m | ||
| Accuracy | ±1.6m | ||
| Breakage location | Yes | ||
| Scan | Cable type | CAT5、CAT6 (STP & UTP) | |
| Max. signal voltage | 8Vp-p | ||
| Frequency | 130KHz | ||
| AC filter | Yes | ||
| Max range | 600m | ||
| POE | Test range | DC 5~60V standard / non-standard PoE switch | |
| Voltage display | Yes | ||
| PoE type | IEEE 802.3af/at | ||
| LCD display | 128*64 Dot-matrix with backlight | ||
| Power supply | AAA*3 (Not included) | ||
| Low battary warning | 2.7V | ||
| Auto-off time | 15min、30min、60min、OFF | ||
| Voltage protection | DC48V 5mA | ||
| Max working current | <150mA | ||
| Receiver | Sentivity adjustable | Yes | |
| AC Voltage detecting | Yes | ||
| Lamp | Yes | ||
| Battary type | 9V*1 (Not included) | ||
| Low battary warning | 6± 0.5V | ||
| Max working current | <100mA | ||
| Remote | Wiremap Port | RJ45 | |
| Voltage protection | DC48V 5mA | ||