• Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 1
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 2
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 3
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 4
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 5
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 6
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 7
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 8
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 9
  • Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2 image 10
Tulkot latviski

Tool: for crimping | non-insulated terminals | 0.5÷2.5mm2

EB Koodi: EB1074261935

Valmistajan tuotekoodi: 
9013400000

Valmistaja, merkki: 
WEIDMÜLLER

 461,06 € 
Sisältää arvonlisäveron / gb
Toimittajan varastossa 2 kpl
⛟ Toimitus 1-3 työpäivää maksun jälkeen. 
On kysymys?
-+

Product Properties

Type of toolfor crimping
Crimp tool applicationnon-insulated terminals
Wire cross-section0.5...2.5mm2
Crimp tool featuresa modified lever mechanism enables to operate with lower force in comparison with standard tools
Crimp tool featuresblackened tool
Crimp tool featuresergonomic pads on handles
Crimp tool featurespositioner for precise positioning of the crimped terminal in the tool
Crimp tool featuresthe crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool length200mm
Tip width6.3mm