• Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 1
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 2
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 3
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 4
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 5
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 6
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 7
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 8
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 9
  • Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2 image 10
Tulkot latviski

Tool: for crimping | non-insulated terminals | 0.1÷2.5mm2

EB Koodi: EB309061474

Valmistajan tuotekoodi: 
97 52 04

Valmistaja, merkki: 
KNIPEX

 211,28 € 
Sisältää arvonlisäveron / gb
Toimittajan varastossa 2 kpl
⛟ Toimitus 1-3 työpäivää maksun jälkeen. 
On kysymys?
-+

Product Properties

Type of toolfor crimping
Crimp tool applicationnon-insulated terminals
Wire cross-section0.1...2.5mm2
Wire size27AWG...13AWG
Length0.25m
Crimp tool featuresa modified lever mechanism enables to operate with lower force in comparison with standard tools
Crimp tool featuresa ratched mechanism serves also as a handle lock
Crimp tool featuresblackened tool
Crimp tool featureselongated handles enable operation with both hands
Crimp tool featuresergonomic pads on handles
Crimp tool featureshandles fitted with plastic sleeves
Crimp tool featuresthe crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool featurestool made of tempered steel
Tool materialchrome - vanadium steel