• Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 1
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 2
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 3
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 4
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 5
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 6
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 7
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 8
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 9
  • Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm image 10
Tulkot latviski

Tool: for crimping | insulated solder sleeves | 0.08÷16mm2 | 220mm

EB Koodi: EB685762045

Valmistajan tuotekoodi: 
909930

Valmistaja, merkki: 
HELUKABEL

695,96 €
Sisältää arvonlisäveron / gb
Toimittajan varastossa 1 kpl
⛟ Toimitus 1-3 työpäivää maksun jälkeen. 
On kysymys?
-+

Product Properties

Type of toolfor crimping
Crimp tool applicationinsulated solder sleeves
Crimp tool applicationnon-insulated solder sleeves
Wire cross-section0.08...16mm2
Wire size28AWG...5AWG
Die shapehexagon
Crimp tool featuresa special head mechanism crimps a die symmetrically
Crimp tool featuresblackened tool
Crimp tool featuresergonomic pads on handles
Crimp tool featuresself-adjusting mechanism adapts the die shape to the size of crimped cable ferrule
Crimp tool featuresthe crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool materialsteel
Tool length220mm