Camera module VTO4202F-P

Features:



• Anodized front aluminum panel; IK07

• Supports voice and video communication

• 2 MP high definition fisheye camera with 160° view range

• Access control function; controls two locks

• Surface mount and flush mount

• IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)



Technical Specifications:



System

• Main Processor SoC processor

• Operating System Embedded Linux operation system

• Network Protocol IPv4, RTSP, RTP, TCP, UDP, SIP, P2P

Basic

• Camera CMOS Low illumination 2MP HD colorful 160° fisheye camera

• Angle of View H:160°, V:82°, D:180°

• Focal Length 1.95 mm

• WDR

• Noise Reduction Noise suppression and echo cancellation

• Video Encoding H.264

• Frame Rate PAL: 25 fps; NTSC: 30 fps

• Video Bit Rate 256K to 2M

• Light Compensation IR light

• Day/Night Switch Yes

• Audio Encoding PCM G.711 A G.711 U

• Audio Input Built-in omnidirectional microphone

• Audio Output Built-in loudspeaker

• Audio Bit Rate 16Khz 16bit

Function

• Communication Methods: Digital communication

• Unlock Mode Remote unlocking

• Auto Snapshot Yes

• Leave Videos or Text

• Messages Yes

• Web Configuration Yes

Performance

• Housing Material Aluminum

Port

• RS-485 Port 1 RS-485 half-duplex port

• Alarm Output Port 1

• Power Output Port 1-ch 12 VDC output 100mA

• Unlock Button Exit button for opening the door

• Door Status Detection Detects door magnetic status

• Door Lock Control NC/COM/NO

• Ethernet Port 10/100 Mbps self-adaptive Ethernet/2-wire

Alarm

• Tamper Alarm Tamper alarm

Regular

• Ingress Protection

• IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)

• Appearance Color Silver

• Housing Material Aluminum

• Power Supply Mode 12 VDC/PoE

• Installation Method Surface mount and flush mount

• Accessory Mounting box

• Dimensions 100mm×100mm×49.30mm (3.94"×3.94"×1.94")

Protection Grade

• IK07, IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)

• Working Temperature -20°C to +60°C (-4°F to +140°F )

• Working Humidity 10%RH–90%RH

• Power Consumption ?12W

• Net Weight 0.35kg (0.77 lb)

• Gross Weight 0.4kg (0.88 lb)