Voltage stabilizer SilverCloud 2000VA 1200W 9.1A output 230V ± 10%
EB Kood: EB1066024239
Tootja kauba kood: PNI-SCK2000V
Tootja, kaubamärk: SilverCloud
⛟ Tarne 7-10 tööpäeva jooksul pärast makse sooritamist.
Maximum power |
|
|
The automatic voltage stabilizer SilverCloud K2000VA can be used to power electronic devices that consume cumulatively up to 1200 W. |
entry |
|
SilverCloud K2000VA is powered with a voltage that can vary between 140 and 260 V. |
|
output |
|
|
The output of the stabilizer is constant 230V±10% provided by 2 schuko sockets located on its rear panel. |
Exit delay |
|
The stabilizer is equipped with an output signal delay circuit which is recommended in the use of refrigeration equipment, to minimize the possibility of compressor motor failure. |
|
Double counter |
|
The SilverCloud K2000VA has a double counter on the front panel to monitor both input and output voltage, and 3 LED indicators to monitor device status. |
|
Protection |
|
The stabilizer is equipped with electrical protection circuits for overvoltage (when the input exceeds the value of 255 V), short circuit and overload. |
|
Video presentation |
|
Voltage stabilizer SilverCloud 2000VA 1200W UK |
Features | |
Capacity | 1200W/2000VA |
Current | 9.1A |
Output connectors | 2 x Schuko socket |
Output voltage | 230V ± 10% |
Input frequency | 50/60 Hz |
Nominal input voltage | 140V~260V AC |
Short circuit protection | Yes |
Overload protection | Yes |
Efficiency | 98% |
Storage temperature | -15~45 degrees C |
Working temperature | 0~40 degrees C |
Moisture | 10%RH ~ 95%RH |
size | 179 x 140 x 237 mm |
Weight | 6 kg |
Exit delay | 6 ~ 120 seconds |
Package contents | |
Voltage stabilizer | Yes |
User manual | Yes |
Accessory | Power cable 1.3 meters |