SilverCloud 1000VA 600W 4.5A voltage stabilizer
EB Kood: EB1394165592
Tootja kauba kood: PNI-SCK1000V
Tootja, kaubamärk: SilverCloud
⛟ Tarne 7-10 tööpäeva jooksul pärast makse sooritamist.
Maximum power |
|
|
|
The automatic voltage stabilizer SilverCloud K1000VA can be used to power electronic devices that consume cumulatively up to 600 W. |
entry |
|
|
SilverCloud K1000VA is powered with a voltage that can vary between 140 and 260 V. |
|
output |
|
|
|
The output of the stabilizer is constant 220V+/-10% provided by 2 schuko sockets located on its rear panel. |
Exit delay |
|
|
The stabilizer is equipped with an output signal delay circuit which is recommended in the use of refrigeration equipment, to minimize the possibility of compressor motor failure. |
|
Double counter |
|
|
|
The SilverCloud K1000VA has a double counter on the front panel to monitor both the input and output voltage, and 3 LED indicators to monitor the device status. |
Protection |
|
|
The stabilizer is equipped with electrical protection circuits for overvoltage (when the input exceeds the value of 255 V), short circuit and overload. |
|
Video presentation |
|
Voltage stabilizer SilverCloud 1000VA 600W |
| Features | |
| Capacity | 600W/1000VA |
| Current | 4.5A |
| Output connectors | 2 x Schuko socket |
| Output voltage | 230V ± 10% |
| Input frequency | 50/60 Hz |
| Nominal input voltage | 140V~260V AC |
| Short circuit protection | Yes |
| Overload protection | Yes |
| Efficiency | 98% |
| Storage temperature | -15~45 degrees C |
| Working temperature | 0~40 degrees C |
| Moisture | 10%RH ~ 95%RH |
| size | 160 x 125 x 235 mm |
| Weight | 4.5 kg |
| Exit delay | 6 ~ 120 seconds |
| Package contents | |
| Voltage stabilizer | Yes |
| User manual | Yes |
| Accessory | Power cable 1.3 meters |