Shelly Dimmer Gen3 WiFi Light Controller
EB Kood: EB1907836285
Tootja kauba kood: DimmerGen3
Tootja, kaubamärk: SHELLY
⛟ Tarne 3-5 tööpäeva jooksul pärast makse sooritamist.
Shelly Dimmer Gen3 WiFi Light Controller
The Shelly Dimmer Gen3 is a compact, single-circuit light dimmer that allows precise control of lighting brightness from a smartphone, tablet, computer or home automation system. It works over a Wi-Fi local network without the need for an additional hub, and also supports remote control via the cloud. It can work with or without a neutral wire. The device also offers Wi-Fi signal amplification, interoperability with Bluetooth and BLE Gateway, and a range of automation options, including schedules, scripts and integration with systems like Home Assistant, Google Home, Alexa or SmartThings.
Working with and without a neutral wire
The Shelly Dimmer Gen3 allows installation in both systems with and without a neutral wire, which is key when retrofitting existing installations. For operation without a neutral wire, a Bypass module is required if the load is less than 20 watts - such a solution prevents the lamp from accidentally glowing after it is turned off.
Accurate measurements and protection
When the neutral wire is connected, the device allows the measurement of voltage (180-240 V), current (0-3 A) and energy consumption. These measurements are made with an accuracy of ±5%. In addition, the device is equipped with an internal temperature sensor and short-circuit and overload protection. Note: these functions work properly only when connected with a neutral conductor.
Convenient control and precise dimming
The product supports trailing edge mode, which provides smooth dimming of a wide range of light sources - from LEDs (up to 150 W) to halogen bulbs (up to 200 W) and electronic transformers. Automatic dimmer calibration guarantees a uniform dimming effect regardless of the type of light source. Built-in functions such as minimum and maximum brightness setting, transition time adjustment and night mode allow full control over lighting - both manually and through schedules.
Automation and advanced schedules
Shelly Dimmer Gen3 supports up to 20 schedules and 20 webhooks (with 5 URLs for each). It allows you to create advanced scenarios using scripts and local actions. You can schedule brightness changes, transition times and set automatic light on/off. With support for MQTT, KVS and virtual components, deep integration with advanced building automation systems is possible.
General
| Shelly |
| DimmerGen3 |
Physical parameters
| 38 x 42.5 x 16.5 mm / 1.50 x 1.67 × 0.65 inches |
| 24.3 g / 0.86 oz |
| 0.4 Nm / 3.5 lbin |
| 0.2 to 2.5 mm² / 24 to 14 AWG (solid, multi-strand, sleeves) |
| 5 to 6 mm / 0.20 to 0.24 in. |
| Wall box |
| Plastic |
| Green, print: black |
| Black |
Environmental conditions
| -20°C to 40°C / -5°F to 105°F |
| 30% to 70% RH |
| 2000 m / 6562 ft |
Electrical parameters
| 220-240 V~, 50 Hz |
| < 1,5 W |
| Yes |
| 20 W |
| Trailing edge |
| 16 A, characteristic B or C, 6 kA breaking capacity, energy limitation class 3 |
| Yes |
Output circuit parameters
| 200 W |
Sensors and measurements
| 180-240 V |
| ±5% (when used with neutral conductor) |
| 0-3 A |
| ±5 % (when used with neutral conductor) |
| Yes |
Wi-Fi
| 802.11 b/g/n |
| 2412-2472 MHz |
| < 20 dBm |
| Up to 30 m indoors / 50 m outdoors (depending on conditions) |
Bluetooth
| 4.2 |
| 2402-2480 MHz |
| < 4 dBm |
| Up to 10 m indoors / 30 m outdoors (depending on conditions) |
Microprocessor unit
| ESP32 C3 / STM32 G051 |
| ESP32 C3 - 40 MHz |
| 8 MB |
Firmware features
| 20 |
| 20 with 5 URLs per webhook |
| Yes |
| Yes |
| Yes |
| Yes |