Termostaat 230V STC-1000

A universal regulator is used in the operation of central heating pumps, circulation pumps, fans and many similar devices.
Switching between cooling and heating modes
Temperature control
Temperature calibration
External thermostat

Key Features:
Heating - in this mode, the relay is turned on until the temperature rises to the set value
Cooling - in this mode, the relay is on until the temperature drops temperature control, setting the set point and hysteresis value.
Temperature calibration.
Compressor delay.
Large and easy to read LCD display.
Connection diagram on the body.
Minimalistic and lightweight design made of premium components.
Wide temperature control range (-50 to 90 degrees C).
Automatic alarm in case of over temperature or sensor error.

Technical parameters and specification:
Temperature measurement range: -50°C – 99°C
Measurement accuracy: ±1°C for the range (-50°C – 70°C)
Power supply: 220VAC ±10%, 50/60Hz
Sensor NTC sensor (1 pc.)
Relay contact load: Cooling (10A/250VAC), Heating (10A/250VAC)
Maximum contact power: Cooling 2.5kW, Heating 2.5kW
Operating temperature: 0°C – 60°C
Permissible humidity: 20% - 85%
Measurement resolution: 0.1°C
Sensor error delay: 1 minute
Power consumption: <3W
Storage temperature: -30°C - 75°C

Product dimensions:
Front panel: 75 (L) x 34 (width) [mm]
Product dimensions: 75 (L) x 34 (W) x 85 (H) [mm]
Assembly dimensions: 70 (L) x 27 (W) [mm]
Sensor cable length: ~1 meter (with sensor)