Qoltec Hybrid Solar Inverter Off-Grid 3kVA | 2.4kW | 80A | MPPT | Sinus
EB Kood: EB1282297557
Tootja kauba kood: 53876
Tootja, kaubamärk: QOLTEC
⛟ Tarne 3-6 tööpäeva jooksul pärast makse sooritamist.
The off-grid hybrid inverter converts the energy created by PV modules into energy needed to power electrical appliances. It works as a solar charger and battery charger. Equipped with a multifunctional LCD display that records operating data allowing continuous monitoring and management of the entire system. The inverter operates in off-grid mode.
It has a built-in 80A MPPT charge controller. Possibility to connect an additional wi-fi module. Does not support BMS.
The off-grid hybrid inverter converts the energy created by PV modules into energy needed to power electrical appliances. It works as a solar charger and battery charger. Equipped with a multifunctional LCD display that records operating data allowing continuous monitoring and management of the entire system. The inverter operates in off-grid mode.
It has a built-in 80A MPPT charge controller. Possibility to connect an additional wi-fi module. Does not support BMS.
- Pure sine wave inverter,
- automatic restart during power restoration,
- easy-to-read multifunction LCD display,
- 80A MPPT charge controller,
- ability to be powered by mains or generator,
- ability to change AC/Solar charger priority settings via LCD display,
- intelligent charger design for optimal battery performance,
- configurable input voltage range for home appliances and personal computers using the settings on the LCD display panel,
- configurable battery charging current according to devices and personal computers via settings on the LCD display panel,
- protection against overload, overheating, overcharging and short circuit,
- cold start function,
The battery charging inverter uses a state-of-the-art 100A MPPT charge controller to maximize the power drawn from the photovoltaic panels, using advanced maximum power point tracking technology.
Having this feature significantly affects the efficiency of the photovoltaic installation-they can maintain high power even in low sunlight conditions. In addition, the controller controls the battery operation and charging process and protects the battery from damage.
The product is equipped with a multifunctional, easy-to-use LCD display with control panel. Facilitates monitoring of the entire photovoltaic installation . Allows you to configure the input voltage range for home appliances and personal computers or change the priority settings of the AC/Solar charger. In addition, the display records data and informs about failures, reacting accordingly if any of the parameters exceed the norm. If a fault occurs, the inverter shuts down.
Producer | Qoltec |
Type | Off-Grid |
Phase | 1 |
Rated Power | 3000VA/2400W |
Nominal Input voltage | 230VAC |
Input Voltage Range | 120 - 450 VAC |
Working frequency | 50/60 HZ |
Maximum power | 6000W for 5s |
Efficiency | 95% |
Transfer time | 10 ms (PC) 20 ms (home appliances) |
Waveform | Pure sine wave |
Type of charging | MPPT |
Battery voltage | 24 VDC |
Battery charging voltage | 27VDC |
Maximum charging current | 80A |
Variable charging voltage | 27VDC |
Battery overcharge protection | 31VDC |
Maximum battery charging current from PV | 80 A |
Built-in battery | No |
Work without battery | No |
Maximum PV array open circuit power | 3000W |
MPPT operating voltage range | 120 ~ 450VDC |
Maximum PV array open circuit voltage | 450 VDC |
Screen | LCD |
Interface | RS232 |
Connector diameter | M6 - 6 mm |
Cooling system | 2 x fan |
Noise level | 45 dB |
Protection | Anti-short-circuit Against overheating Against overload Against overload |
Colour | White, black |
Additional information | Possibility to connect an additional wi-fi module Does not support LiFePO4 batteries Does not support BMS |
Notices | We require the device to be installed by a qualified installer with the appropriate authorization. In case of installation by unauthorized persons, the warranty will automatically expire. The included protocol is an integral part of the warranty and is necessary to file a claim for defective goods within 24 months from the date of purchase. |
Working temperature | -10˚C ~ +50˚C |
Storage temperature | -15˚C do +60˚C |
Storage humidity | 10-95% without condensation |
Size | 348 x 270 x 95 mm |
Package contents | Solar inverter RS232 communication cable User manual CD Device installation protocol Warranty card |
Package depth / length [mm] | 410 |
Package height [mm] | 175 |
Package width [mm] | 350 |
Net weight [kg] | 5.1 |
Gross weight [kg] | 5.96 |
Certificate | CE |
Warranty | 24 month |