Xiaomi Mi Robot S10+ Vacuum Cleaner

Dual-pad pressure mopping for better stains removal

Thorough vacuuming - 4000Pa Powerful suction fan blower*
Fewer collisions - 3D obstacle avoidance
Pressure mopping with constant moisture - Effective mopping
Precise navigation - LDS laser navigation system
Smart control - Support customised cleaning patterns

Core performance upgraded
Stronger fan blower suction and longer battery life

4000Pa Powerful suction fan blower
Vacuum dust and debris in one go

Stronger fan blower suction power allows you to clean your home more efficiently. With the 4000Pa fan blower suction power, your daily cleaning needs can be met easily. The 4 suction power settings allow you to clear away dust, hair and large particles in one go.

• 4 speeds suction mode adjustment
• 450 ml* large-capacity dustbin

Up to 2 hours of battery life*
Easily handle large homes

5200mAh nominal battery capacity. Last up 2 hours* in Sandard mode, offering you greater peace of mind. The robot is capable of cleaning over 200㎡* areas with one pass in Standard mode, more than enough to handle large rooms.

*5200mAh nominal battery capacity.

New mode simulating manual mopping
Effectively remove stains, achieving a higher standard of cleaning

Pressure mopping* at constant moisture
Effectively remove stains, 4 times the cleaning power*

The dual mop pads rotate at high speeds to simulate the effect of manual pressure mopping, greatly improving the cleaning power and effectively removing wet, dry and other stains.

Double-layer composite mop pads
Strong water absorption and effective removal of stains

Mop pads made of woven fabrics (80% polyester + 20% modified polypropylene fibre) retain moisture evenly.
Powerful cleaning performance effectively removes floor stains when mopping and can effectively protect floor surfaces throughout the house.

• Hook-and-loop fastener design
• Easier to assemble and disassemble

Large-capacity smart electronic control water tank
Mop floors up to 150㎡ in one pass*

Smart electronic control water tank with increased 200ml capacity* releases water evenly without leakage.
Constant moisture mopping for up to 80 minutes, sufficient to meet the floor cleaning needs of a 150㎡* household in one pass.

• Constant moisture mopping
• Three levels of water flow control

Ultra-sensitive position identification system
3D obstacle avoidance, laser navigation

3D obstacle avoidance
Fewer collisions even in dim-light environments

Millimetre-level obstacle identification. No more than 5mm* margin of error between detected distance and actual distance.
The robot precisely avoids obstacles and protects painted furniture surfaces, significantly reducing the risk of getting stuck and ensuring fewer collisions even in dim-light environments.

Carpet edge identification*
To prevent mounting the carpet when mopping

When the robot works in the Mopping mode, the robot will automatically avoid the carpet so that the mop pads do not soak it.

Laser navigation with scanning of the entire house
Accurately plan cleaning routes

With the assistance of dual-line laser and LDS LIDAR, the robot can carry out 360° scanning of rooms and quickly build a map, regardless of room lighting conditions, then accurately plan the cleaning route without any omission or error.

All-round protection of user security and privacy

TÜV Rheinland Cybersecurity and Privacy
Protection Standard Certification

• Map Management - Encryption on map transmission and cloud storage
• MJA1 Security Chip - Hardware-based protection for devices and secure transmission of user data
• Xiaomi / Mi Home app* - Leading international security protection with accredited security certifications, based on the standards ISO 27001, ISO 27701 and ETSI EN 303 645.

* App name varies according to the country/region, Mi Home app is also named Xiaomi Home app in some countries or regions. Xiaomi reserves the right to the final interpretation.

Smart interaction
One-tap cleaning control and customisation

Create a personalised cleaning plan

Once the map has been built, a more rational cleaning plan can be developed according to the room layout, with cleaning time, setting, area and frequency — customise as you wish.

Custom room cleaning order
Different cleaning setting and frequency for each room
Customise when to clean specified areas
Clean multiple floors without moving the charging dock
Multi-floor mapping function
Set up no-go areas and virtual walls
Keep no-go areas off limits

Remote control via the Xiaomi/Mi Home app
Clean the home automatically wherever you are

Control remotely via the Xiaomi/Mi Home app. Even if you are out and about, you can still make sure a clean house with just one tap.

NOTES:
*4000Pa Powerful suction fan blower: Data from Dreame Technology Laboratory. With the main unit fully charged, suction power was verified to reach 4000Pa with a vacuum tester.
*450mL large-capacity dustbin: After manually filling the entire dustbin with standard plastic particles, emptying the dustbin and putting the plastic particles into a measuring tank, the three samples measured all held more than 450mL.
*Battery life up to 2 hours: When fully charged and in Standard mode, the robot performed cleaning in a rectangular open space of 4x5m. Testing was performed three times in the same environment and under the same conditions and all results demonstrated more than 2 hours of cleaning time.
*Cleans an area over 200㎡ in one pass: When fully charged and in Standard mode, the robot performed cleaning in a rectangular open space of 4x5m. Testing was performed three times in the same environment and under the same conditions and all results demonstrated a cleaning area greater than 200㎡.
*Pressure mopping: Compared with the Mi Robot Vacuum-Mop, when pressure-tested the Xiaomi Robot Vacuum S10+ with its dual pads produced greater ground pressure than the Mi Robot Vacuum-Mop.
*4 times the cleaning power: Compared with the Mi Robot Vacuum-Mop 2, the cleaning power is 4 times greater. Actual usage may vary depending on conditions of use.
*Cleaning an area of 150㎡ with one pass: When fully charged with a full water tank, the robot in Standard mode cleaned a rectangular open space of 4mx5m. Each test was continued until the water in the water tank of the machine was depleted. Testing was performed three times in the same environment and under the same conditions. The mopped areas were all recorded as greater than 150㎡.
*Equipped with a 200mL electronic control water tank: The water tank was filled with water and the water was then poured into a measuring cup and its level on the scale of the measuring cup was recorded. Three tests were performed on 3 prototypes respectively and the average value of the tested results was within the range of 200±10mL.
*Margin of error of no more than 5mm: industrial-grade reflectors with different reflectivity were placed on a high-precision mobile sliding rail with movement precision of 0.05mm, and the range was 0–500mm. With the centre of the collision plate as the starting position (0cm) and 50mm being set as the movement step length for the line laser measurement accuracy at different distances, there was only a deviation of ±5mm within 500mm, therefore, achieving millimetre-level accuracy. Depending on environmental conditions and usage scenes, actual obstacle identification results and avoidance effectiveness may vary.
Carpet edge identification: The robot can identify carpets with a thickness greater than 5mm. If there are carpets with a thickness of less than 5mm in the cleaning area, we recommend only cleaning the area after removing the mop pad tray, or marking the area as a no-go area. If there are special flooring materials (such as cobblestones) in the cleaning area, the robot may mistakenly identify them as a carpet and perform obstacle avoidance. We recommend only cleaning such areas after disabling the carpet identification function on the Xiaomi/Mi Home app.
*All function displays on this page are for illustrative purposes and may differ from the actual product.
*The data on this page was provided by Dreame Laboratory unless otherwise specified.

Specifications:

• Model: B105
• Item Dimensions: 350×350×97 mm
• Rated Power: 55 W
• Charging Time: Approx. 6 hours
• Net Weight (with Accessories): 4.4 kg
• Net Weight (Robot Vacuum): 3.8 kg
• Battery: 4800 mAh (Rated Capacity), 5200 mAh ( Nominal Capacity )
• Rated Voltage: 14.4 V⎓
• Charging Base Specifications
  • Model: CDZ2101
  • Item Dimensions: 130×126×93 mm
  • Rated Input: 100-240 V~50/60 Hz 0.5 A
  • Rated Output: 19.8 V⎓1 A