HDMI AOC 2.1 VERSION full fiber kits 80m
Code: HDMI-80m-AOC-KIT
In stock ElectroBase
- Important in the latest HDMI 2.1:
- The maximum supported format is 10K at 120Hz.
- Bandwidth up to 48 Gbps (uncompressed) or 120 Gbps (compressed).
- Dynamic HDR to specify HDR metadata scene by scene or even frame by frame.
- Display Stream Compression (DSC) 1.2 is used for video formats larger than 8K with 4:2:0 chroma subsampling.
- High Frame Rate (HFR) for 4K, 8K, and 10K, supporting refresh rates up to 120 Hz.
- Enhanced Audio Return Channel (eARC) for object-based audio formats such as Dolby Atmos and DTS: X.
- Variable Refresh Rate (VRR) reduces or eliminates lag and stutter.
- Quick Media Switching (QMS) for movies and video prevents delays that can cause a blank screen to appear before content displays.
- Quick Frame Transport (QFT) reduces latency by delivering individual frames over HDMI as quickly as possible if the link hardware supports higher bandwidth.
- Important in the latest HDMI 2.1:
- The maximum supported format is 10K at 120Hz.
- Bandwidth up to 48 Gbps (uncompressed) or 120 Gbps (compressed).
- Dynamic HDR to specify HDR metadata scene by scene or even frame by frame.
- Display Stream Compression (DSC) 1.2 is used for video formats larger than 8K with 4:2:0 chroma subsampling.
- High Frame Rate (HFR) for 4K, 8K, and 10K, supporting refresh rates up to 120 Hz.
- Enhanced Audio Return Channel (eARC) for object-based audio formats such as Dolby Atmos and DTS: X.
- Variable Refresh Rate (VRR) reduces or eliminates lag and stutter.
- Quick Media Switching (QMS) for movies and video prevents delays that can cause a blank screen to appear before content displays.
- Quick Frame Transport (QFT) reduces latency by delivering individual frames over HDMI as quickly as possible if the link hardware supports higher bandwidth.
The ElectroBase® kit provides the latest HDMI 2.1 (8K @ 60Hz, 4K @ 120Hz) signal transmission over long distances thanks to a special Active Optical Cable (AOC).
The HDMI connector of the signal source of the set has a built-in special microprocessor, which converts the electrical signal into an optical light signal. The light signal is transmitted without signal loss or interference via an optical cable at a distance of up to 150m.
The opposite process takes place in the connector next to the display or projector - the optical signal is converted into an electrical signal thanks to the built-in processor.
Power is supplied to the signal side connector from the HDMI jack and therefore does not require a separate power supply.
Power is provided on the Display side either from the HDMI jack or by connecting the supplied USB cable to the Display's USB port.
The optical cable is symmetrical in both directions, as you can change the directions of the Signal Source and Display by simply changing the HDMI connectors after changing the cable.