Cable Tracer | Cable Tester | Fiber Optic Cable Tester | Optical Power Meter

Cable Tester

Test network cable continuity, shorted, broken and cross, can quickly trace UTP/STP cable, widely used in engineering wiring, equipment room maintenance, equipment update and other scenarios target cable.

Features:

• Continuity testing
• Cable scan
• Port flash
• Length measurement
• POE Power Supply Test
• QC testing
• Optical power meter
• VFL function
• NVC function

Specifications:

• Cable Type: CAT5/CAT6
• Voltage Protection: 60V
• Scan Frequency: 455KHz
• Accuracy of Length Function:
• ≤20M: +/-1.6M
• 20M~100M: +/-2.4M
• >100M: +/-3.2M
• Power Supply: 3.7V 1500mAh Polymer lithium battery
• Charge: Type-C connector

Wire Mapping & Continuity Test

Check Cat5 & Cat6 Cables status. Display length and exact faults like opens, splits, shorts, and crossings on an LCD screen.

Cable Trace

Adjustable signal strength indicator helps find cables from bundled cables, different rooms, walls, and ceilings. (300 meters/984 feet).

Port Flash

Sending signals through connected cables to flash ports on 10M/100M/1000M hubs, panels, routers, or switches. Sync frequency flashing on Port & LCD Screen.

POE Test

Diagnose the PoE network by listing pins of the power supply, and other statuses like voltage, polarity, and PSE(af or at standard).

Optical Power Meter

Measure optical power and loss in multimode and single-mode fiber (850/1300/1310/1490/1550/1625/1650).

Visual Fault Locator

Quickly navigate Fiber break points with visible red lights.

QC Test

Tell if crystal heads are properly crimped.

NCV

Non-contact voltage detector on Receiver levels up safety and reduces chances of damaging devices.