Tulkot latviski
Industrial DIN Rail Power Supply - Single Output - 32.5 W - 5 V - 6.5 A
Industrial DIN Rail Power Supply - Single Output - 32.5 W - 5 V - 6.5 A
EB Kods: EB752265419
Ražotāja preces kods:
HDR-60-5
Ražotāja preces kods:
HDR-60-5
Ražotājs, zīmols: China
Ražotājs, zīmols:
China
47,99 €
Ar PVN / gb
Pieejams piegādātāja noliktavā 4 gab.
⛟ Piegāde 10-15 darba dienas pēc apmaksas.
⛟ Piegāde 10-15 darba dienas pēc apmaksas.
output: "
†DC voltage: 5 V "
†rated current: 6.5 A "
†current range: 0 - 6.5 A "
†rated power: 32.5 W "
†ripple & noise (max.): 80 mVp-p "
†voltage adj. range: 5.0 - 5.5 V "
†voltage tolerance: ± 2.0 % "
†line regulation: ± 1.0 % "
†load regulation: ± 1.0 % "
†setup, rise time: 500 ms, 50 ms / 230 VAC - 500 ms, 50 ms / 115 VAC at full load "
†hold up time (typ.): 30 ms / 230 VAC - 12 ms / 115 VAC at full load "†input: "
†voltage range: 85-264 VAC (277 VAC operational) - 120-370 VDC (390 VDC operational) "
†frequency range: 47 - 63 Hz "
†efficiency (typ.): 85 % "
†ac current (typ.): 1.2 A / 115 VAC - 0.8 A / 230 VAC "
†inrush current (typ.): cold start 30 A / 115 VAC - 60 A / 230 VAC "†protection: "
†overload: "
†105 - 160 % rated output power "
†protection type: constant current limiting, recovers automatically after fault condition is removed "
†overvoltage: "
†5.75 - 6.75 V "
†protection type: shut down output voltage, re-power on to recover "†environment: "
†working temperature: -30 to +70 °C "
†working humidity: 20 to 90 % RH non-condensing "
†storage: -40 to +85 °C, 10 to 95% RH "
†temperature coefficient: ± 0.03 %/°C (0 - 50°C ) "
†vibration: 10 - 500 Hz, 2G 10 min / 1 cycle, 60 min each along X, Y, Z axes, mounting: compliance to IEC60068-2-6 "
†operating altitude: 2000 m "
†over voltage category: III, according to EN61558, EN50178, EN60664-1, EN62477-1, altitude up to 2000 meters "†safety & EMC: "
†safety standards: UL60950-1, UL508, TUV EN61558-2-16, IEC60950-1 approved, design refer to TUV EN60950-1 "
†withstand voltage: input to output: 4 kVAC "
†isolation resistance: input to output: 100 MOhm / 500 VDC / 25 °C / 70 % RH "
†EMC emission: "
†conducted (EMC emission): EN55032 (CISPR32) / Class B "
†radiated: EN55032 (CISPR32) / Class B "
†harmonic current: EN61000-3-2 / Class A "
†voltage flicker: EN61000-3-3 "
†EMC immunity: "
†ESD: EN61000-4-2 / Level 3, 8KV air - Level 2, 4KV contact - criteria A "
†radiated susceptibility: EN61000-4-3 / Level 3 - criteria A "
†EFT/Burest: EN61000-4-4 / Level 3 - criteria A "
†surge: EN61000-4-5 / Level 4, 2KV/L-N - criteria A "
†conducted (EMC immunity): EN61000-4-6 / Level 3 - criteria A "
†magnetic field: EN61000-4-8 / Level 4, criteria A "
†voltage dips and interruptions: EN61000-4-11 / >95% dip 0.5 periods, 30% dip 25 periods - >95% interruptions 250 periods "†other: "
†MTBF: 927.6Kh, MIL-HDBK-217F (25 °C) "
†dimensions: 52.5 x 90 x 54.5 mm (W x H x D)
ultra slim design with 52.5 mm (3SU) width "†universal input 85-264 VAC (277 VAC operational) "†no load power consumption < 0.3 W "†isolation class II "†pass LPS (limited power source) "†DC output voltage adjustable "†protections: short circuit / overload / over voltage "†cooling by free air convection (working temperature : -30 - +70°C) "†DIN rail TS-35/7.5 or 15 mountable "†over voltage category III "†LED indicator power on "†3 year warranty "†for professional use only "†This device must be installed by a qualified person.
†DC voltage: 5 V "
†rated current: 6.5 A "
†current range: 0 - 6.5 A "
†rated power: 32.5 W "
†ripple & noise (max.): 80 mVp-p "
†voltage adj. range: 5.0 - 5.5 V "
†voltage tolerance: ± 2.0 % "
†line regulation: ± 1.0 % "
†load regulation: ± 1.0 % "
†setup, rise time: 500 ms, 50 ms / 230 VAC - 500 ms, 50 ms / 115 VAC at full load "
†hold up time (typ.): 30 ms / 230 VAC - 12 ms / 115 VAC at full load "†input: "
†voltage range: 85-264 VAC (277 VAC operational) - 120-370 VDC (390 VDC operational) "
†frequency range: 47 - 63 Hz "
†efficiency (typ.): 85 % "
†ac current (typ.): 1.2 A / 115 VAC - 0.8 A / 230 VAC "
†inrush current (typ.): cold start 30 A / 115 VAC - 60 A / 230 VAC "†protection: "
†overload: "
†105 - 160 % rated output power "
†protection type: constant current limiting, recovers automatically after fault condition is removed "
†overvoltage: "
†5.75 - 6.75 V "
†protection type: shut down output voltage, re-power on to recover "†environment: "
†working temperature: -30 to +70 °C "
†working humidity: 20 to 90 % RH non-condensing "
†storage: -40 to +85 °C, 10 to 95% RH "
†temperature coefficient: ± 0.03 %/°C (0 - 50°C ) "
†vibration: 10 - 500 Hz, 2G 10 min / 1 cycle, 60 min each along X, Y, Z axes, mounting: compliance to IEC60068-2-6 "
†operating altitude: 2000 m "
†over voltage category: III, according to EN61558, EN50178, EN60664-1, EN62477-1, altitude up to 2000 meters "†safety & EMC: "
†safety standards: UL60950-1, UL508, TUV EN61558-2-16, IEC60950-1 approved, design refer to TUV EN60950-1 "
†withstand voltage: input to output: 4 kVAC "
†isolation resistance: input to output: 100 MOhm / 500 VDC / 25 °C / 70 % RH "
†EMC emission: "
†conducted (EMC emission): EN55032 (CISPR32) / Class B "
†radiated: EN55032 (CISPR32) / Class B "
†harmonic current: EN61000-3-2 / Class A "
†voltage flicker: EN61000-3-3 "
†EMC immunity: "
†ESD: EN61000-4-2 / Level 3, 8KV air - Level 2, 4KV contact - criteria A "
†radiated susceptibility: EN61000-4-3 / Level 3 - criteria A "
†EFT/Burest: EN61000-4-4 / Level 3 - criteria A "
†surge: EN61000-4-5 / Level 4, 2KV/L-N - criteria A "
†conducted (EMC immunity): EN61000-4-6 / Level 3 - criteria A "
†magnetic field: EN61000-4-8 / Level 4, criteria A "
†voltage dips and interruptions: EN61000-4-11 / >95% dip 0.5 periods, 30% dip 25 periods - >95% interruptions 250 periods "†other: "
†MTBF: 927.6Kh, MIL-HDBK-217F (25 °C) "
†dimensions: 52.5 x 90 x 54.5 mm (W x H x D)
ultra slim design with 52.5 mm (3SU) width "†universal input 85-264 VAC (277 VAC operational) "†no load power consumption < 0.3 W "†isolation class II "†pass LPS (limited power source) "†DC output voltage adjustable "†protections: short circuit / overload / over voltage "†cooling by free air convection (working temperature : -30 - +70°C) "†DIN rail TS-35/7.5 or 15 mountable "†over voltage category III "†LED indicator power on "†3 year warranty "†for professional use only "†This device must be installed by a qualified person.