Tulkot latviski
DC Surge Protection Device, 3P, Class C, 20-40 kA, 1000VDC
DC Surge Protection Device, 3P, Class C, 20-40 kA, 1000VDC
EB Kood: EB150978859
Tootja kauba kood: NV821747
Tootja kauba kood:
NV821747
45,30 €
Sisaldab käibemaksu / gb
Saadaval tarnija laos 5 tk
⛟ Tarne 1-3 tööpäeva jooksul pärast makse sooritamist.
⛟ Tarne 1-3 tööpäeva jooksul pärast makse sooritamist.
Surge Protection Device, 3P, Class C, 20-40 kA, 1000VDC
Features:
Widely used in induction thunder and influence of direct lightning or other transient overvoltage surge protection, to protect DC power system, photovoltaic system, wind power generation and other industrial DC power equipment safe to use.
Standards: IEC 61643-1, CE.
Specifications:
Number of contacts: 3.
Class: C.
Maximum continuous operating voltage (Uc): 1000V DC.
Maximum discharge current (Imax): 40 kA.
Nominal discharge current (In): 20 kA.
Voltage protection level (Up): < / = 3.6 kV.
Response time: <25 ns.
Frequency: 50/60 Hz.
Operating temperature: -40°C to +85°C.
Relative humidity (at 25°C): <95%.
Installation: on DIN rail (35mm).
Wires cross-section: 4-6 mm².
Dimensions: 54 x 90 x 67 mm.
Warranty: 24 months.
Features:
Widely used in induction thunder and influence of direct lightning or other transient overvoltage surge protection, to protect DC power system, photovoltaic system, wind power generation and other industrial DC power equipment safe to use.
Standards: IEC 61643-1, CE.
Specifications:
Number of contacts: 3.
Class: C.
Maximum continuous operating voltage (Uc): 1000V DC.
Maximum discharge current (Imax): 40 kA.
Nominal discharge current (In): 20 kA.
Voltage protection level (Up): < / = 3.6 kV.
Response time: <25 ns.
Frequency: 50/60 Hz.
Operating temperature: -40°C to +85°C.
Relative humidity (at 25°C): <95%.
Installation: on DIN rail (35mm).
Wires cross-section: 4-6 mm².
Dimensions: 54 x 90 x 67 mm.
Warranty: 24 months.