Tulkot latviski
DIP SWITCH 12 POSITIONS
DIP SWITCH 12 POSITIONS
EB Kood: EB506582361
Tootja kauba kood:
DS-12
Tootja kauba kood:
DS-12
Tootja, kaubamärk: Taiwan
Tootja, kaubamärk:
Taiwan
8,48 €
Sisaldab käibemaksu / gb
Saadaval tarnija laos >10 tk
⛟ Tarne 10-15 tööpäeva jooksul pärast makse sooritamist.
⛟ Tarne 10-15 tööpäeva jooksul pärast makse sooritamist.
number of switches: 12 "†length: 31.48mm "†mechanical life: min. 10000 operations per switch "†electrical life: min. 5000 operations per switch, 50mA/24Vdc "†ratings: "
†non-switching: 100mA, 50Vdc "
†switching: 50mA, 24Vdc "†circuit: single-pole single-throw "†materials and finish: "
†case: UL94-VO, PBT. PBT is glass-fibre reinforced "
†cover: UL94-VO, PBT. PBT is glass-fibre reinforced "
†actuators: UL94-VO, PBT. PBT is glass-fibre reinforced "
†terminals: phosphor bronze with 3 micro inches of gold plating over nickel "
†top seal: polyester film "†electrical and mechanical specifications: "
†contact rating (carry): "
†(a) (contact rating (carry)): 50Vdc 100mA in constant situation "
†(b) (contact rating (carry)): 24Vdc 50mA with make-and-break "
†contact resistance (at current 100mA): "
†(a) (contact resistance (at current 100mA)): initially max. 30mohm "
†(b) (contact resistance (at current 100mA)): 100mohm max. after life test "
†insulation resistance (at voltage 500Vdc): min. 1000Mohm between adjacent terminals "
†capacitance: 5pF between adjacent terminals "
†dielectric breakdown voltage: 500Vdc / 1minute "
†operating temperature range: -40°C to +70°C, no failures "
†shock: DIP switches withstand a saw-tooth waveform of 20gr 11ms, with no contact opening > 10 microseconds "
†vibration: MIL-STD-202F-method 201A, frequency : 10-55-10Hz/1 min., direction : X, Y, Z three directions that are perpendicular to each other. No mechanical damage or intermittent change of switch setting during or after testing "
†markings: special side or top markings are optional "†packing: "
†all DIP switches are shipped in standard IC tubes with all poles in the 'off' position
†non-switching: 100mA, 50Vdc "
†switching: 50mA, 24Vdc "†circuit: single-pole single-throw "†materials and finish: "
†case: UL94-VO, PBT. PBT is glass-fibre reinforced "
†cover: UL94-VO, PBT. PBT is glass-fibre reinforced "
†actuators: UL94-VO, PBT. PBT is glass-fibre reinforced "
†terminals: phosphor bronze with 3 micro inches of gold plating over nickel "
†top seal: polyester film "†electrical and mechanical specifications: "
†contact rating (carry): "
†(a) (contact rating (carry)): 50Vdc 100mA in constant situation "
†(b) (contact rating (carry)): 24Vdc 50mA with make-and-break "
†contact resistance (at current 100mA): "
†(a) (contact resistance (at current 100mA)): initially max. 30mohm "
†(b) (contact resistance (at current 100mA)): 100mohm max. after life test "
†insulation resistance (at voltage 500Vdc): min. 1000Mohm between adjacent terminals "
†capacitance: 5pF between adjacent terminals "
†dielectric breakdown voltage: 500Vdc / 1minute "
†operating temperature range: -40°C to +70°C, no failures "
†shock: DIP switches withstand a saw-tooth waveform of 20gr 11ms, with no contact opening > 10 microseconds "
†vibration: MIL-STD-202F-method 201A, frequency : 10-55-10Hz/1 min., direction : X, Y, Z three directions that are perpendicular to each other. No mechanical damage or intermittent change of switch setting during or after testing "
†markings: special side or top markings are optional "†packing: "
†all DIP switches are shipped in standard IC tubes with all poles in the 'off' position