Multifunctional Network Cable Tester | Cable Locator

Transmitter Features:

• Alignment Test: Normal, Cross, Short Circuit, Open Circuit.
• Length Test: Network line length breakpoint test, without calibration.
• Wire Detection Mode: Ordinary mode/anti-interference mode.
• PoE Test: Power supply wire core and power supply voltage detection. Both standard and nonstandard PoE can be tested.
• Port Blinking: The network line is quickly located on the switch/router.
• Crimping Test: To test whether the registered jack is crimped properly.

Transmitter Specifications:

• Wiremap Testing: Capable of testing cable types CAT5 and CAT6. Detects cable sequence and various faults including normal, open circuit, short circuit, and cross.
• STP/UTP Recognition: Distinguishes between Shielded Twisted Pair (STP) and Unshielded Twisted Pair (UTP) cables during testing.
• Maximum Range: Offers a testing range of up to 600 meters.
• Quality Control Test (QC):
  • Test Type: BP (Beyond Pass).
  • Response Speed: Less than or equal to 1 second.
  • Minimum Recognition: Detects faults accurately at a minimum distance of 10 cm.
• Length Testing:
  • Test Line: Compatible with CAT5 and CAT6 cables.
  • Test Range: Covers distances from 2.5 to 200 meters.
  • Accuracy: Provides precise measurements with an accuracy of within ±2.0m for lengths between 20 to 100 meters, and within ±3.2m for lengths exceeding 100 meters.
• SCAN Feature:
  • Cable Type: Supports CAT5 and CAT6 cables.
  • Max Signal Voltage: Signals with a voltage of SV±1.0VP-P.
  • Frequency: Operates at 455KHz.
  • Dual Mode: Offers both Analog and Digital mode for versatile testing.
  • Maximum Range: Able to scan cables up to 600 meters.
• POE Testing:
  • Voltage Test Range: Detects voltages ranging from DC 5V to 60V.
  • Power Supply Core/Jumper Mode: Supports end jumper, middle jumper, 8-core power supply, and unknown configurations.
  • PSE Type: Compatible with non-standard, IEEE802.3at/af Power over Ethernet (PoE) standards.
• Flash Feature:
  • Duplex Identification: Identifies both full-duplex and half-duplex connections.
  • Auto-Negotiation: Capable of automatic and non-automatic negotiation.
  • Switch Type: Supports 10M, 100M, and 1000M switches.
• Display and Controls:
  • LCD Display: Features a 128*64 Dot-matrix LCD display with backlighting.
  • Language Options: Supports display in both Chinese and English.
  • Keys: Equipped with 4 function keys and 1 power button for easy navigation.
  • Ports: Includes three RJ45 ports and one RJ11 port.
• Power and Battery:
  • Power Supply: Powered by a 3.7V 1400mAh polymer lithium battery.
  • Battery Management: Indicates low battery level and offers auto-off options after 15, 30, or 60 minutes of inactivity.
  • Voltage Protection: Ensures safety with protection against voltages up to DC60V.
  • Maximum Working Current: Operates within a maximum current limit of 200mA.
• Compact Design:
  • Size: Compact dimensions measuring 125x70x32mm make it portable and convenient for field use.

Receiver Features:

• Wire Detection Function: Anti-interference mode/ordinary mode (used with other models)
• Alignment Test: Local alignment test and remote alignment test
• Crimping Test: To test whether the registered jacks RJ11 and RJ45 are crimped properly
• PoE: Power supply wire core, mid-span and end-span
• VFL: 10mW
• LED Flashlight
• Battery Indication
• Power Supply: 3.7V lithium polymer battery
• Dimension of Receiver: 200x52x33mm