SilverCloud 1500VA 900W 6.8A voltage stabilizer
EB Koodi: EB1321289706
Valmistajan tuotekoodi: PNI-SCK1500V
Valmistaja, merkki: SilverCloud
⛟ Toimitus 5-8 työpäivää maksun jälkeen.
Maximum power |
|
|
|
The automatic voltage stabilizer SilverCloud K1500VA can be used to power electronic devices that consume cumulatively up to 900 W. |
entry |
|
|
SilverCloud K1500VA is powered with a voltage that can vary between 140 and 260 V. |
|
output |
|
|
|
The output of the stabilizer is constant 1500VA provided by 2 schuko sockets located on its rear panel. |
Exit delay |
|
|
The stabilizer is equipped with an output signal delay circuit which is recommended in the use of refrigeration equipment, to minimize the possibility of compressor motor failure. |
|
Double counter |
|
|
|
The SilverCloud K1500VA has a double counter on the front panel to monitor both input and output voltage, and 3 LED indicators to monitor device status. |
Protection |
|
|
The stabilizer is equipped with electrical protection circuits for overvoltage (when the input exceeds the value of 255 V), short circuit and overload. |
|
Video presentation |
|
Voltage stabilizer SilverCloud 1500VA 900W UK |
| Features | |
| Capacity | 900W/1500VA |
| Current | 6.8A |
| Output connectors | 2 x Schuko socket |
| Output voltage | 230V ± 10% |
| Input frequency | 50/60 Hz |
| Nominal input voltage | 140V~260V AC |
| Short circuit protection | Yes |
| Overload protection | Yes |
| Efficiency | 98% |
| Storage temperature | -15~45 degrees C |
| Working temperature | 0~40 degrees C |
| Moisture | 10%RH ~ 95%RH |
| size | 175 x 139 x 237 mm |
| Weight | 5.2 kg |
| Exit delay | 6 ~ 120 seconds |