JETTER VPA Electronic Throttle Corrector AUDI BENTLEY JAGUAR PORSCHE VW

JETTER VPA Electronic Throttle Corrector AUDI BENTLEY JAGUAR PORSCHE VW

AUDI A8 (4E) - 2004> 2009 Petrol 3 and 4.2 liters, Diesel 3 and 4.2 liters turbo

AUDI Q7 - 2006> 2016 - All Engines

AUDI S8 - 2006> 2009 - 5.2 L

BENTLEY BROOKLANDS - 2008> 2011 - All Engines

BENTLEY CONTINENTAL - 2004> 2017 - All Engines

BENTLEY BROOKLANDS - 2008> 2011 - All Engines

BENTLEY CONTINENTAL - 2004> 2017 - All Engines

BENTLEY FLYING SPUR - 2014> 2019 - All Engines

BENTLEY SUPERSPORTS - 2017> 2018 - 700hp Engine

JAGUAR X-TYPE - 2001> 2009 - 2.5l V6 petrol

JAGUAR XF - 2009> 2010 - All Engines

JAGUAR XJ - 2004> 2009 - All Engines

JAGUAR XK - 05/2006> 2009 - All Engines

PORSCHE CAYENNE - 2002> 2010 - All Petrol Engines

PORSCHE CAYENNE - 2011> 2017 - All Engines

VW TOUAREG - 2003> 2011 - All Gasoline Engines and 3.0L Diesel

VW TOUAREG 2 Gen. - 2011> 2017 - All Engines

JETTER is designed as a separate complete module that is connected to the connector of the position sensors on the accelerator pedal. No modifications of the car parts are required to connect JETTER. JETTER contains a microprocessor that converts signals from accelerator pedal position sensors and transmits them to the engine management system controller.

JETTER converts the signals from the throttle pedal position sensors in such a way as to provide a "hard" connection between the throttle pedal position and the throttle valve, eliminating the delay in its opening. Opening the throttle valve without a lag allows more working mixture to be supplied to the engine cylinder earlier than in the standard version, which makes it possible to achieve more torque and power faster. This, in turn, improves acceleration dynamics. When you release the accelerator pedal, the throttle valve closes immediately, as in the standard version. Maintenance free.

When installing JETTER, both increase and decrease in fuel consumption is possible. Depending on the driving style, this value can reach ± ??0.4 liters per 100 km.

The throttle valve control algorithm is separate from the other control algorithms of the electronic controller of the car, and therefore the installation of JETTER on the car does NOT affect the operation of systems such as fuel supply, ignition, anti-lock braking system (ABS), TCS and others. JETTER is "transparent" for the diagnostic system of the engine and its systems. To achieve the maximum result of JETTER's work, the anti-slip and anti-skid systems can be turned off with the standard button.

Easy to install!

However, due to the design features of the automotive harness pads and the likelihood of their damage, it is recommended to install the device at a specialized service station.

More information - Jetterauto.ru